Showing posts with label repousse. Show all posts
Showing posts with label repousse. Show all posts

Tuesday, January 9, 2018

Can anyone tell me what art is?




Pin Up Girl
This is a piece I made several years ago.
It's currently in a show at the Las Vegas City Hall Grand Gallery.
Sounds fancy no?
I had to name it for the show because ART has a name.
I call it "Pin-up Girl".
It's hung on a little nail on the wall in my house for years.
I whipped up the stand for the show because it had to sit on a pedestal.
Can it be classified as "fine art"?  
I have no idea.


     I feel like I'm a little off my game this month.  I guess it's because I'm annoyed which has distracted me.  I've been approached five (I'm going to be specific about this) times in the last week by people asking me to show my work.  I don't mind showing my work.  What annoys me is that all the people who approached me want to show "fine art".  It's not the people who have gotten under my skin. They are all lovely and generous people.  It's the idea.  I find the idea of ART a confusing trap.  What is art?  My evolving definition is, art is any work that makes a deliberate statement about the human condition. This isn't necessarily a universal definition. What is fine art?  I have no idea.  Why would what I do in any way qualify as fine art or not?  Again, I have no idea.  This is what comes of fuzzy definitions and marketing constructs.  


wall decor
This is wall decor.  ???  Not mine

     Here's the thing.  For millennia people just made stuff.  They painted on cave walls, and made pots, and carved weapons from stone, and fashioned pelts into garments, and all the rest.  It was just part of what made us human.  Deep down, or for some of us right on the surface, we still have that drive to make stuff.  There are always needs to be met.  I wonder when we allowed ourselves to be separated from this basic human drive.  Also, why we value some forms of creativity more than others.


     A few years ago the musician Patti Smith wrote a book called "Just Kids".  In it she talks about her friendship  with the photographer Robert Mapplethorpe and being a young artist in New York.  My take from the book is that Patti is driven to create not by the need to create, or the desire to be an artist, but because she isn't capable of not creating.  She is fully in touch with the thing that makes her human.  She cannot live without creating.  This is probably a bit of an exaggeration, but it's a sentiment that I can fully relate to.  I feel adrift if I am not engaged in making things.  

     So?  Is it art?

     It's stuff and I am constantly working on my craft.  I am always challenging myself to do what I do better.  But just using the word craft reduces the value of my work.  Somehow in the 19th century, after the patronage system fell apart and ART was created as a marketing ploy, craft took a huge hit.  So now people who have not mastered a craft can be artists.  Yes, this is pissy of me.  I don't resent people who throw spit wads at plywood and call it art.  It may be art for all I know.  I just think that those of us who make functional things should get more respect.  Because I'm starting to think "fine art" means it can't have a function and it needs a way to have value.  And maybe that is why I am annoyed.  


Picasso
Picasso.  I would hang it on my wall.


     Artists will often tell you that it's not about the money, but the whole idea of ART is designed to give financial value to work that has no intrinsic value.  This is fine with me.  I do think that many of those things that we see as art are important.  It is a way to communicate ideas, especially unpopular ideas.  However, much of what is called fine art is just pretty decor. It makes no statement,  deliberate or accidental,  about the human condition and often requires little skill. It's something that fills a space on the wall or in a niche.  It sells because most people don't want something in their home that never shuts up.  Something that constantly nags at them.  We want a peaceful environment.  I get that, but there seems to be an odd disconnect in these definitions.  And yes, this is about the money.  In a capitalist society, money equals respect.   Again back to why I'm annoyed.  I don't understand why someone who has little skill but makes colorful decor and calls it fine art gets more respect than someone who is highly skilled and makes useful objects that may or may not be called art.  Artisans need better marketers.  


wall decor
Not Picasso.  I would not hang this on my wall, but ?????


     Anyway, now I either have to tell the nice people no or I have to decide which of the things I make constitute "fine art".  In any case, I need to let go of being annoyed.  I can't change the world.  Plus, it probably doesn't want to change and we all know how that usually works out.   My hunch is that I will just not show.  The fine art designation is too confusing for me.


Chased elephant mirror
Detail of one of my pieces.  It's a mirror.  Is it art  ?????

     Maybe if I whine long enough and loud enough someone will tell me that they want to show things made of metal where the metal has been moved by hammers and chisels.  I could do that show.  

Time to stop whining and get back to work.  
 j

Monday, September 4, 2017

Helpful hints from hello, wheez...cough cough...sigh



The Raven

As part of my never ending effort to be useful, I decided to try a post with some potentially useful information.  At least I think it's useful.  It's always possible that nothing I have to say is useful and that's why I spend most of my time talking to myself.      ...Eh.

A long time friend of mine from a former life who suspiciously follows me on Instagram asked for this information.  Well, ya know, he asked how I did this and I said I'd make a video.  What I actually said was, if I told him I'd have to kill him......so it's possible you will all have to die.  Probably not right away though. Anyway, I reconsidered and told him I would make a video.  Only, 1 - It would be 10 hours long and that's even too much for me.  And, 2 - I don't know how to make a video..... so the first part is just an excuse to cover up the second part.  Really though, 10 hours would be even more tedious than this explanation of why I am not making a 10 hour film.  Plus boredom would be a terrible way to die.  I decided to spare my fan and do a blog post instead.  So Bob, here's another post for you.

Anyway, back to the aforementioned somewhat useful information.  Chasing and repousse.  I will not, or probably not,  go into a long explanation of what each one is and how they differ.  Basically they are techniques that transform a flat piece of metal into a three dimensional relief.  Or something like that.  If you want the full explanations go to Wikipedia.  You can read that stuff there.  There are probably better places to find out about it but Wikipedia is concise. 

The definitions are less important to me than the technique.  Sort of.

Traditionally repousse and chasing were done in gold, silver and copper based metals.  I don't work in gold and silver and although I have some copper scrap, I mostly have aluminum scrap.  So that's what I have been using for my repousse and chasing.  One day I will graduate to steel and copper.  This is consistent with my life philosophy which is always start your day with gruel.  Otherwise it could go downhill.  Or sideways.  In other words, master every technique in the hardest possible material and then everything else will be cake.  Cake being dessert...and the last thing you eat in a day because you want to end on a high note.  Start with gruel.  End with cake.  Every day is a good day.

I feel like I should get to the meat of this blog now.  

As I said, I have aluminum sheet scrap.  I think it's 14g or maybe 16g.  It's scrap from a project I did probably 10 or so years ago.  I don't remember the exact gauge or alloy.  It's actually a bit scary because it's in jagged cuts off of the full sheets and the edges are sharp.  So I have these odd shaped pieces of aluminum sheet that I have been trying to come up with a use for.  My situation changed and I decided to do some repousse and chasing.  

Let me walk you through my process.  If you want to try this, you will need some things.  I'm just going to make a list of the things I think are useful or necessary when doing chasing and repousse.

  • A flat piece of metal sheet and an understanding of annealing and work hardening metals
  • A way to anneal the sheet.  I use a propane torch because I am working pretty small
  • A not hard surface.  This one is a little tricky.  There are a lot of things that can be used as backing.  Since I am working small, I use a pitch bowl.  There are several types of pitch and the type you choose is based on how you work.  My pitch is a combination because I keep trying new pitches.  But if you are just starting and want to try this without a huge investment, you could try using carpet or rubber or wax as a backing.  I met a guy last year who does all his chasing in wax because it gives the way he wants it too, and he thinks pitch is too hard.  The reason I use a bowl, rather than a box or some other thing to hold my pitch, is that I can move it and angle it as I work.  Dang, I gotta go take a picture of this.  BRB  hahahahah 
    Pitch bowl on stand
  • A hammer with a large flat face.  I have several hammers.  I use two most often.  I have a cheap cobblers hammer and I have an expensive chasing hammer.  They cost me about the same amount each.  You can get a cheap chasing  hammer for less than $10.  It will work fine and give you a chance to not spend all your money on tools that you will toss in a corner when you get frustrated and give up.  Not that you will.
  • Chasing tools.  Oh yeah.  That's a wide open thing.  I made most of mine,  You can buy them but it's pricey.  I don't think you need a lot of tools to start.  To begin you could probably get away with a liner, some kind of pusher and a planisher.  I made my favorite liner from a small cold chisel that had seen some rough use.  I have a doming block from HarborFreight that I use for pushing.  It may not work on other metals.  And I made a planisher from another broken chisel.  I do have a bit of tool steel around the shop, so I have made a few chasing tools over the last year.  Each situation will dictate the tools necessary, but for a basic form and to see how metal moves you can start very basic.  You could start with just a planisher that also pushes.  
  • Safety glasses and ear plugs.  Don't be an idiot.  
  • Good light
  • A surface to flatten the work between processes and when you are done.  I use an anvil.  
  • A soft hammer to flatten the work as above.  I use a cheap wood mallet, but some day I will probably invest in a paper hammer.  

I think that's all the tools.  The first thing you must do is anneal the metal.  As part of that process I heat the pitch so that the metal will stick to it and I can work.  Once the metal is stuck to the pitch, I can draw the figure on the face of the metal with a liner. That is the entire first step.  Easy.
All the tools and the Raven drawn with the chisel in the aluminum sheet. I used a curved and a straight liner and my cobblers hammer.

Just beginning the repousse using doming tools
Next I remove the metal from the pitch (this takes heat) and turn it over and reattach it to the pitch. This is the beginning of the repousse phase.  To be honest, I am still working on this.  I need to get better at not over pushing the metal and seeing the negative form.  While you are doing this you are working on the back side of the piece. I also work with the pitch warm.  I never want to do any work where I'm not sweating all the time.

Ready to be removed from the pitch and be turned over for chasing









The raven has been reattached to the pitch and is ready for chasing










Once the repousse is complete you need to heat the metal again to remove it from the pitch and dress the pitch by reheating it and moving it around so it's ready to hold the work again.  I often anneal the work again at this point.  I also put pitch in the back of the work so that it is fully supported for chasing.  

The aluminum needs to be flattened
The Raven has had the detail added.  I should have taken more pictures of the chasing process. This is after it has been flattened on the anvil.
Chasing is the most fun part of the process because that's when the work takes on it's final shape and begins to really look like your vision.  This is probably the most time consuming part.  I'm not entirely happy with this raven, but that's because I made a mistake in my thinking.  I am always learning so I hope I won't make that mistake again.  Usually by the end of the chasing, the metal has broken free of the pitch.  If it hasn't then you need to heat it.  If it breaks free too soon, you will need to reattach it.  
The Raven lifted off the pitch
The raven after the curve in the aluminum has been removed.

This should be fun.  Keep in mind that you are sculpting directly into the metal sheet.  You should work it until it looks the way you want it to look.  


The impression of the Raven in the pitch.  You can see some of the different pitch colors I use.
Oh yeah, your hands will probably hurt.  

And Bob, thanks for asking, I have all new teeth now and my jaw is mostly healed.

Back to work
j